Climbing > Belay & Ascend

The Pirana Descender by Petzl is a figure-eight descender for descending on single or double rope. FEATURES of the Pirana Descender by Petzl SPECIFICATIONS: Three different braking positions to select from before beginning a descent Two supplementary braking spurs allow friction to be varied during descent A carabiner with a...

Back up a belay, use it on a Tyrolean traverse, or haul up your haul bags, no matter the job, Petzl's Mini Traxion Pulley is equal to the task. You'll get your money's worth with this 3 in 1 device that provides you with a pulley, self jamming pulley, and...

The Easy Aider by Metolius streamline the process of moving up the rungs in a traditional aider. Just clip the next placement and pull on the tail to instantly adjust foot height exactly where needed. No more fighting the feet out of, and then back into your aider. The wide,...

The Petzl Shunt multi-purpose device is designed for ascending as well as a backup brake for rappelling, occasional self-belays, or top rope belays. Will lock on single or identical double kernmantle ropes but not on braided ropes; fits single ropes from 10 - 11 mm and double ropes from 8...

The ATC-XP offers two modes of use so you can give a smooth ride to anyone. Deep, cleated V-grooves provide higher friction for catching heavier climbers or when using smaller ropes in icy conditions. Its thick walls and smooth curves make it incredibly rope friendly. Use the low friction side...

Whether you're toproping at the gym or leading a stout sport climb at the crag, the self-braking Petzl Grigri is great for working routes. On belay, slow rope movement runs freely, while falls initiate the braking cam to help the belayer catch and hold a climber While lowering the climber,...

The Ascension by Petzl has been refined to provide greater comfort; efficiency, ease of use. The ergonomically shaped grip is over molded with rubber for greater friction and the broader surface provides greater comfort while pulling on the ascender. The grip is wider at the bottom providing better comfort for...

The Stop Descender by Petzl is a device constructed for self braking on rappel with a single rope. Moving downwards on a rope can be an exhilarating experience, especially into canyons or caves where going too fast could be detrimental. Thread your rope through the Stop, and control your speed...

Always be ready for an unexpected situation with the ultra-lightweight TIBLOC compact emergency ascender from Petzl. Use this sturdy, chrome-plated steel unit as a Prusik replacement or as a progress capture device within a hauling system. Ready for you in a tight situation, count on the strength of the chrome-plated...

Designed for rescue or hauling heavy loads Large sheave mounted on sealed ball bearings for high efficiency Pulley specifically designed for heavy loads and intensive use Triangular attachment point can accept up to three carabiners, facilitating maneuvers and installation Breaking strength : 16 kN x 2 = 32 kN Working...

When Black Diamond designed the ATC they were searching for the best belay device around: one that would feed rope smoothly and easily, one that didn´t kink the rope while rappelling, one that would hold falls effectively and was both durable and lightweight. That´s a tall order for any one...

This convenient package includes an ATC belay device coupled with an Airlock 2 Screw gate locking carabiner. Big Air Package includes the Black Diamond ATC and Airlock2 screwgate. ATC's Beefy, coated cable won’t get sucked into device. Open Gate: 7 kN (1,574 lbf) Minor Axis: 7 kN (1,574 lbf) Strengths:...

The CMI Rescue 8 is big enough to handle the largest ropes--two of them. Extended horns on the upper ring prevent rope from sliding up and locking when tying off. Dual holes on the tie-in end all the eight to remain attached to the harness while threading the rope, preventing...

Ascend fixed lines with Petzl's Croll ascender that, when paired with a chest strap, operates smoothly and efficiently thanks to an angled attachment hole that keeps the device aligned on the chest. Operate it with one hand - the ergonomic thumb-catch makes installation and removal easy while the safety catch...

The DMM Hitch Climber Pulley combines a compact rigging plate with a high-efficiency pulley to excel in friction-hitch climbing systems. Organize carabiners, ascend, descend, or rig it for rescue or hauling. This pulley has three separate attachment points and can accommodate up to 14mm ropes. For big-wall aid climbs and...

The Petzl Gemini Pulley is a double swing-sided Prusik pulley designed for rescue loads that demand a greater mechanical advantage. With the lightweight size and incredible strength, the Gemini will simplify your rigging and hauling tasks, for big walls, tree work, rescues, or anything really that requires a pulley system....

The nForce Ascender by Black Diamond offers 33% more clamping force than any conventional ascender design on the market for maximum grip on icy or muddy ropes. Fast cam manipulation can be achieved by using the thumb, trigger finger or the edge of the frame. The comfortable, full-sized molded handgrip...

DMM made the V-Twin Belay Device out of stainless steel instead of aluminum to increase durability and keep it cooler on long rappels. The deep V-shaped grooves provide solid breaking performance on ropes ranging from 8 to 10.5mm, so you can take it along whether you're using your fatty on...

Petzl Pantin Foot Ascender Features: It is used to complement CROLL, ASCENSION and ASCENTREE rope clamps New cam facilitates passage of the rope through device, even on the first meters Cam is totally integrated into the body of the rope clamp to help prevent rubbing Makes ascent faster and less...

This could be the best all around belay/rappel device on the planet. The result of intensive R&D work, it is light, compact, durable and can smoothly handle just about any rope combination. The machined cooling fins on the Pyramid work both to keep it cool and to make it less...

A single-rope, sport-cragging belay device, the ATC-Sport by Black Diamond is built using the rest of the ATC family's time-tested design. This simple, lightweight, hot-forged device can handle a rope from 7.7-11 mm, and is designed with regular and high-friction modes for excellent versatility and holding/stopping power. FEATURES of the...

The Black Diamond Pecker climbing tool has evolved from a lineage that began with the Crack'n-up and went through the Beak. The Peckers #1, #2 and #3 are the latest additions of thin-aid tools. Ideal for clean aid when speedy intermediary moves are necessary between sinker placements, any of the...

Black Diamond’s Pulley is strong and light. It weighs only 2.7 ounces and works well for big wall hauling and emergency situations requiring rescue. The frame is made of tough heat treated aluminum alloy. The nylon wheel rotates on a self lubricating, oil filled bronze bearing, providing smooth action and...

Single ropes, double ropes, twins. The Bug belay/rappel device can handle it all. Whether you’re catching or rapping, the massively radiused edges are easy on your ropes. The ribbed profile improves your grip when you are loading the rope and helps to dissipate heat on those long rappels. Lightweight belay/rappel...

The development of Climbing ropes has made significant progress over the last few years, with rope diameters becoming ever smaller and the strength and performance ever more impressive. In line with this trend we have developed the Bugette to compliment its bigger brother the Bug. If you are using ropes...