Skiing > Tuning

Pocket-size side-edge and base-edge sharpener . . . Pocket-size side-edge and base-edge sharpener with 40mm file in one tool. Side edge: 88 and 89 degrees. Base edge: 0.5 and 1.0 degrees.

After you're done waxing, sharpen the edges of your skis or snowboard with the Swix Compact Edger. A knob makes this Swix edge sharpener easy to use, and it feels comfortable in your hand. It uses a 40mm file to give you a side edge bevel from 90 to 85-degrees...

Side-edge and base-edge sharpener with 40 mm file, in one tool. Compact and comfortable Side-edge 90 to 85 degrees Base-edge 0.5 to 1 degrees.

You know the sound of a nice, big chunk of granite burrowing into a pretty new ski? It’s the sound that comes right before ‘I’m gonna be sick! BLEAH’! With the Swix Master Tuning and Wax Kit, you’ll know that if you hear that sound, you can make it all...

Add some support to your tuning fleet... Need some extra support when tuning up your skis before a race? Swix three piece vise with wide jaws 50mm for better grip and stability when working on carving skis and radial alpine skis. 40 mm to 85 mm

Clean your skis after races and ski-touring with the Swix Base Cleaner, a handy pocket sized Base Cleaner aerosol. Formulated to minimize health and fire hazards.R.5 fl. oz.

ON THE HILL Diamond Disk Tuner. 88 and 89 degrees. Fixes your edges quickly! Diamond disk tuner

Use the Swix Edge File Guide w/ Roller Bearing & Clamp to produce precise edge bevels on your skis or board. This guide’s roller bearings prevent it from scraping up your base, and the file clamp ensures accurate beveling so you can go carve on any surface, no matter how...

Fine tune your snowboard or skis easily with Swix's Carving Kit. By including an edger, a file, and a diamond stone and sheet for case hardening, the Carving Kit is a single-tool solution to multiple-tool problems.

Pocket size Side-edge and Base-edge Sharpener with 40 mm file, in one tool. Side-edge 88 and 89 degrees, and base edge 0.5 and 1 degrees.

Clamp your file onto the Swix Side Edge File Guide and get an exact bevel on your alpine or cross country skis. When you feel like your skis are slipping sideways on the slopes, or if the conditions are icy, edging your skis can mean the difference between a smooth...

The Swix .75 is a base-edge file holder that has an aluminum construction and is perfect for all your filing needs.

The Swix snowboard table is perfect for inspecting and tuning your board. Your snowboard can be placed in a vertical or horizontal position. The table is adjustable in height from 71cm to 98cm.

You spent all that cash on wax, don't ruin it by having your iron at the wrong temperature. The Swix T73 Waxing Iron ensures you get the wax where you need it without any waste. The T73 Waxing Iron utilizes the newest technology in iron heating elements. A thick film-type...

Aluminum base-edge guide perfect for all filing needs.

File holder in aluminum for setting up base edge angles on alpine skis and snowboards .5 Degrees

High-performance hydrocarbon glide wax for waxable cross-country skis. Recommended for snow conditions from +28°F (-2°C) to +18°F (-8°C) To apply: Melt wax with iron, iron wax into base, scrape excess, brush with mix or bronze brushR.1 ounces (60 grams) This wax should be used only with waxable (no built-in traction...

The traditional cork for smoothing layers of wax on the base of alpine or nordic skis.

Swix Fibertex is a nylon fiber pad in which small abrasive particles are bonded to the nylon fibers with resin. The purpose of Fibertex is deburring, whereas sandpaper is designed to remove base material.

Fluorinated liquid wax with wide range around freezing. For all snow conditions.

New ergonomic shape. Temperature indicator light. With clips for Attaching Fiberlene paper when using the FCIM, the Fast Clean Iron Method.

Insert set for 2 degree bevel.

Base protector, 140 cm to 165 cm (SL).

Swix Board Grip Vise:Friction type snowboard vise utilizes rubber platform top to grip surface of board for waxing, now platform width can be adjusted for more stability. Sharpening of edges can be done by clamping on edge with center clamping system.