Climbing > Belay & Ascend

The Pirana Descender by Petzl is a figure-eight descender for descending on single or double rope. FEATURES of the Pirana Descender by Petzl SPECIFICATIONS: Three different braking positions to select from before beginning a descent Two supplementary braking spurs allow friction to be varied during descent A carabiner with a...

Back up a belay, use it on a Tyrolean traverse, or haul up your haul bags, no matter the job, Petzl's Mini Traxion Pulley is equal to the task. You'll get your money's worth with this 3 in 1 device that provides you with a pulley, self jamming pulley, and...

The Petzl Shunt multi-purpose device is designed for ascending as well as a backup brake for rappelling, occasional self-belays, or top rope belays. Will lock on single or identical double kernmantle ropes but not on braided ropes; fits single ropes from 10 - 11 mm and double ropes from 8...

Whether you're toproping at the gym or leading a stout sport climb at the crag, the self-braking Petzl Grigri is great for working routes. On belay, slow rope movement runs freely, while falls initiate the braking cam to help the belayer catch and hold a climber While lowering the climber,...

The Ascension by Petzl has been refined to provide greater comfort; efficiency, ease of use. The ergonomically shaped grip is over molded with rubber for greater friction and the broader surface provides greater comfort while pulling on the ascender. The grip is wider at the bottom providing better comfort for...

The Stop Descender by Petzl is a device constructed for self braking on rappel with a single rope. Moving downwards on a rope can be an exhilarating experience, especially into canyons or caves where going too fast could be detrimental. Thread your rope through the Stop, and control your speed...

Always be ready for an unexpected situation with the ultra-lightweight TIBLOC compact emergency ascender from Petzl. Use this sturdy, chrome-plated steel unit as a Prusik replacement or as a progress capture device within a hauling system. Ready for you in a tight situation, count on the strength of the chrome-plated...

Designed for rescue or hauling heavy loads Large sheave mounted on sealed ball bearings for high efficiency Pulley specifically designed for heavy loads and intensive use Triangular attachment point can accept up to three carabiners, facilitating maneuvers and installation Breaking strength : 16 kN x 2 = 32 kN Working...

Ascend fixed lines with Petzl's Croll ascender that, when paired with a chest strap, operates smoothly and efficiently thanks to an angled attachment hole that keeps the device aligned on the chest. Operate it with one hand - the ergonomic thumb-catch makes installation and removal easy while the safety catch...

The Petzl Gemini Pulley is a double swing-sided Prusik pulley designed for rescue loads that demand a greater mechanical advantage. With the lightweight size and incredible strength, the Gemini will simplify your rigging and hauling tasks, for big walls, tree work, rescues, or anything really that requires a pulley system....

Petzl Pantin Foot Ascender Features: It is used to complement CROLL, ASCENSION and ASCENTREE rope clamps New cam facilitates passage of the rope through device, even on the first meters Cam is totally integrated into the body of the rope clamp to help prevent rubbing Makes ascent faster and less...

This fixed-side-plate pulley is best used with ascenders for hauling gear. Rugged aluminum side plates connect at the bottom for a stable rigging system that has a breaking strength of 22 kilonewtons Aluminum sheave features an internal, self-lubricating bushing for repeated reliable use Accepts climbing ropes up to 13 mm...

Lightweight and useful in crevasse rescue systems or hauling situations, Petzl's Oscillante Pulley is a simply designed pulley that's easy to install. Swinging side plates offer quick and easy installation and the non-corrosive surface doesn't eat up your ropes. Thread up more easily with help from the stamped arrows on...

The Petzl® Pantin Foot ascender aids in ascending a rope, making gaining vertical quicker and less tiring. Easy to adjust with DoubleBack buckle Can be put on or taken off the rope without using your hands Chrome-plated steel cam with angled teeth and self-cleaning lot securely grips rope, even in...

The Petzl Reversino Belay Device includes the same ingenious self-locking system as the Reverso, but it comes in a smaller size for use on ropes from 7.5 to 8.2mm. This belay device locks securely when your partner takes a whip on skinny twin ropes, and it allows smooth rappels on...

The Petzl Grigri Belay is a device for belaying a leader or a second and for single rope descents. Self-braking system: if the rope suddenly comes under tension (e.g. in a fall), the cam pivots to pinch the rope, thus helping the belayer stop the climber's fall. Usage is similar...

Compact and lightweight ascender Intended for self-protection on a fixed rope, pulley systems or hauling heavy loads. Axle piece is removable so the device can be installed or removed at any point on the rope. The pin makes it difficult to remove device from rope involuntarily. Pin and axle are...

The Petzl Ascension Handled Ascender is an indispensable piece of gear for jugging fixed lines, big wall climbing, and aid routes. Redesigned with a more ergonomic rubber handle and a self-cleaning steel cam, the Ascension grips your rope firmly and slides up smoothly even in nasty conditions, something you’ll definitely...

The Crevasse Rescue Kit by Petzl is the essential kit for glacial travel (whether on foot or ski) for training courses, alpinists, or freeriders. This kit allow for rapid deployment and use in rescues where someone falls in a crevasse. The case integrates a simple, visual inspection system to quickly...

The Petzl Verso is a simplified version of the Reverso³ offering a lighter and more compact option for climbers looking to further reduce the weight/size of their rack of gear. The asymmetrical V-shaped grooved friction channels adapt the friction for better control using our ARC (Adaptive Rope Control) technology. ARC...

The Petzl Gri-Gri has been making life safer and easier for climbers, arborists and other outdoor professionals for years. Simple maintenance free setup and many years worth of durability, chances are you've seen a GriGri at a crag near you. "Also, its holding power is great when you have someone...

Removable axle can be used to install or remove the clamp at any point on the rope. Locking pin: reduces the risk of undoing the system accidentally The pin and axle cannot be lost, as they are part of the clamp

Pulley with moving side plates Highly efficient, this pulley is designed for rescue, hauling heavy loads and intensive use. Large sheave mounted on sealed ball bearings: excellent efficiency. Accepts up to three carabiners to facilitate use. Certification CE / UIAA Technical specifications Efficiency: 95 % Breaking strength: 2 x 16...

This multi-purpose belay/rappel device is lightweight and easy to use. The asymmetrical V-shaped grooved friction channels adapt the friction for better control using our ARC (Adaptive Rope Control) technology. Ultra-light design: Minimalist construction Hot-forged aluminum Weight: 77 g A single device for all rope types: Effective braking on half and...

The Petzl Shunt is a mechanical replacement for self-jamming knots like the Prusik and the Machard. Positioned below a descender, the Shunt acts as a back-up belay for a rappel descent. It locks onto the rope as soon as you release it and follows your descent when you press on...